Car builders pack suits standard sized vans such as SWB/LWB Transporter, Vito, iLoad, Hiace etc.

Kit includes:

• 5.4sq/m of Stage 1 Sound Deadener - Install on your roof, and side wall panels cover minimum 50% of single skin sheet metal. Controls panel resonance and vibration
• 10sq/m of Van Liner - 10mm peel and stick closed cell foam. Create a radiant heat barrier and soft surface to reduce sound energy. Upholstery glue can be applied to this ready to trim with carpet if desired. This material will be supplied as a roll 1m wide by 5m long with a reflective aluminium face
  2 x Van Liner Tape - This tape utilises the same reflected PET film used on our Van Liner to create a seamless finish
• 1 x Install kit - Application Roller, Utility Knife and Aluminum Foil Tape

Kit is suited for: Transporter, Vito, iLoad, Hiace, Traffic and similar sized vans.

Approximate coverage

Sound deadening: 50% cargo doors, 50% roof, 50% - 100% walls and 100% wheel arches

Insulation 100% cargo doors, roof and walls

Coverage will vary slightly from van model and if cargo windows are installed.

Optional Extras:

Stage 3 - Additional insulation seal - Walls + Roof:

1 x Roll (10sq/m) of Van Seal - Completely skin the walls and roof. The Van Seal has a reflective layer on both sides, with an air gap it will reflect/block radiant heat. On cold nights, it will also keep the warmth inside the van. It is crucial to leave an airgap between this layer and the stage 2 Van Liner for it to work as a thermal barrier.
1 x Spray Adhesive – High temp spray adhesive used to stick the Van Seal on the walls and roof. Simply spray on both the structural ribs and panels of the van, and also the Van Seal, wait 10-15 seconds and stick down.

Optional Flooring:

Option 1.

1 x Roll (10sq/m) Van Seal - Lightweight 4mm thick foam with a reflective face on both sides. Will act as a gasket between your van floor and plywood floor. This will also be a barrier for moisture and prevent any creaks or vibrations that may be present when laying plywood straight onto a metal floor.
Please note: You will receive more than enough to do the floor; you can double layer it.

Option 2.

2 x Sheets (3sq/m) Mass Noise Liner - Heavy duty sound barrier with closed cell foam. Removable sound deadener which can be cut to the floor shape, does not require glue and can be carpeted over. Ideal for blocking road noise.

Car Builders has determined the quantities of materials in these packs based on standard vans. Please take care to check the dimensions of your van to ensure that these quantities work for your build.